|
- XLPE insulated pwoer cable with rated coltage from 3.6/6kV to 26/35kV is produced according to Manufactorer Standard Q/320481LL019-2003(The main quality and specification are higher than IEC60502-1998, IEC60840-1998, GB/T12706-2002.
|
- Maximum rated operation temperature of conductor:90¡æ?br />
|
- Maximum short circuit temperature of conductor (duration 5sec.)250¡æ?/li>
|
- It should be pre-warmed before installation when the ambient temperature is below 0¡æ?
|
- Minimum bending radius of cable for installation(D is the overall diameter of cable):
For non-armoured single core cable:20D
For non-armoured three-core cable:15D
For armoured single core cable:15D
For armoured three-core cable:12D
|
| Items |
Q/320481LL019-2003
(Enterprise Standard) |
IEC60502-1998
IEC60840-1999 |
GB/T12706-2002 |
| Routine Partial discharge test |
Discharge magnitude at 2Uo shall not exceed 5PC. |
For cable of Uo�8kv ,discharge magnit-ude at 1.73Uo shall not exceed 10PC; For cable of Uo>18kv ,discharge magnitude at 1.73Uo shall not exceed 10PC. |
Discharge magmitude at 1.73Uo shall not exceed 10PC. |
| Routine A.C.voltage text |
For cable of Uo�8kv,test voltage of 3.5Uo shall be app-lied for 5 minutes and no brea-kdown of insulation shall occcur; |
For cable of Uo�8kv,test voltage of 3.5Uo shall be app-lied for 5 minutes and no brea-kdown of insulation shall occcur; For calbe of Uo �8kv,test |
For cable of Uo¡Ü18kv,test voltage of 3.5Uo shall be app-lied for 5 minutes and no brea-kdown of insulation shall occcur; |
| |
For cable of Uo�8kv.test voltage of 3.5Uo shall be applied for 5 minutes of 2.5Uo shall be applied for 5 minutes. no breakdown of insulation shall occur. |
For cable of Uo>18kv.test voltage of 2.5Uo shall be applied for 30 minutes no breakdown of insulation shall occur. |
For cable of Uo¡Ü18kv.test voltage of 3.5Uo shall be applied for 5 minutes of 2.5Uo shall be applied for 5 minutes. no breakdown of insulation shall occur. |
| Insulation shrinkage test |
Not more than 2% |
Not more than 4% |
Not more than 4% |
| Hot set test |
Not more than 130% |
Not more than 175% |
Not more than 175% |
| Measurement on cores at the maxi-mum temperature of calbe |
For cable of Uo�kv and Uo �8kv; not more than 40*10; For cable of Uo>18kv; not more than 5*10 |
For cable of Uo�kv and Uo �8kv; not more than 80*10; For cable of Uo>18kv; not more than 10*10 |
For cable of Uo¡Ý6kv and Uo ¡Ü18kv; not more than 80*10; For cable of Uo>18kv; not more than 10*10 |
| Insulation eccentricity(2) |
Not more than 8% |
|
|
| Conductor compacted factor |
Not less than 90% |
|
|
| |
- Insulation calculating formular: P=(Smax-Smin)/Smax
- P-Insulation eccentriity Smax-Max.insulation thickness of the same section; Smin -Min.insulation thickness of the same section.
|
| Type |
Description |
Installation location |
| Coper core |
Aluminium core |
| YJV |
YJLV |
XPLE insulated PVC sheathed power cable |
Aerial, indoor, trench, channel and conduit |
| YJY |
YJLY |
XPLE insulated PVC sheathed power cable |
Aerial, indoor, trench,
channel and conduit |
| YJV22 |
YJLV22 |
XPLE insulated steel tape armoured and PVC sheathed power cable |
Aerial,trench,
channel and conduit |
| YJV23 |
YJLV23 |
XPLE insulated steel tape armoured and PE sheathed power cable |
Aerial,trench,
channel and conduit |
| YJV32 |
YJLV32 |
XPLE insulated fine steel wire armoured and PVC sheathed power cable |
Large difference shaft and underwater |
| YJV33 |
YJLV33 |
XPLE insulated fine steel wire armoured and PE sheathed power cable |
Large difference shaft and underwater |
| YJV42 |
YJLV42 |
XPLE insulated thick steel wire armoured and PVC sheathed power cable |
The shaft for bearing large |
| YJV43 |
YJLV43 |
XPLE insulated thick steel wire armoured and PE sheathed pwoer cable |
puling force and submarine |
| Type |
No.of
Core |
Rated Voltage(kv)
|
| 12/20 |
18/30-26/35 |
| Nominal cross sectional area(mm? |
| YJV |
YJLV |
1 |
25-1200 |
35-1200 |
| YJY |
YJLY |
25-1200 |
35-1200 |
| YJV32 |
YJLV32 |
25-1200 |
35-1200 |
| YJV33 |
YJLV33 |
25-1200 |
35-1200 |
| YJV42 |
YJLV42 |
25-1200 |
35-1200 |
| YJV43 |
YJLV43 |
25-1200 |
35-1200 |
| YJV |
YJLV |
3 |
25-500 |
35-500 |
| YJY |
YJLY |
25-500 |
35-500 |
| YJV22 |
YJLV22 |
25-500 |
35-500 |
| YJV23 |
YJLV23 |
25-500 |
35-500 |
| YJV32 |
YJLV32 |
25-500 |
35-500 |
| YJV33 |
YJLV33 |
25-500 |
35-500 |
| YJV42 |
YJLV42 |
25-500 |
35-500 |
| YJV43 |
YJLV43 |
25-500 |
35500 |