Introduction
GHCABLE offers a wide selection of UL-listed 600V Tray Cable for a variety of control and power applications.
Multi-conductor versions are available as standards from 18AWG to 500MCM. These are unshielded and
shielded versions that come with various insulation and jacket combinations.
Application
These cables are suitable for installation in wet or dry locations. The cables can be used in outdoor and
direct burial applications, and without conduit (exposed runs). TC cable is designed for use in all electrical
equipment.Wind turbine power and control cable /WTTC is intended to be installed in cable trays or raceways
within a wind turbine generator.
Temperature rating and voltage rating
TC: 90°C, 600V
WTTC: 90°C 1000V
Standards
UL1277 for TC, TCER ; UL listed file No. E353915
UL 2277 for WTTC ; UL listed file No. E354502
Construction
Soft annealed bare or tinned copper conductors, with various insulation and jacket options.
Conductor: Soft annealed bare or tinned copper conductors
Insulation: Polyvinyl chloride (PVC) with nylon jacketed (THHN or THWN,TFN or TFFN), PVC (THHW), or XLPE(XHHW) or EPR
Color code: Black conductor with consecutive white numbers; green-yellow earth wire from 3 conductors
Separator: Non-woven tape
Jacket: Sunlight and oil resistant PVC or CPE
Take the soft flexible copper conductor, PVC/Nylon insulation, PVC jacket for example
Size | Conductor Strand (#/AWG) | PVC Insulation Thickness | Nylon Jacket Thickness | PVC Jacket Thickness | Approx. Overall Diameter | Approx. Net Weight | |||||
AWG or MCM | mm | mils | mm | mils | mm | mils | mm | inch | kg/km | lbs/1000ft | |
3*18AWG | 19/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 7.9 | 0.311 | 84 | 56 |
4*18AWG | 19/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 8.4 | 0.331 | 101 | 68 |
5*18AWG | 19/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 9.1 | 0.358 | 127 | 85 |
3*16AWG | 26/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 8.6 | 0.339 | 102 | 69 |
4*16AWG | 26/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 9.3 | 0.365 | 126 | 85 |
5*16AWG | 26/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 9.8 | 0.386 | 151 | 101 |
3*14AWG | 41/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 9.8 | 0.384 | 131 | 88 |
4*14AWG | 41/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 10.0 | 0.394 | 162 | 109 |
5*14AWG | 41/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 11.1 | 0.437 | 196 | 132 |
3*12AWG | 65/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 10.6 | 0.417 | 176 | 118 |
4*12AWG | 65/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 11.5 | 0.452 | 223 | 150 |
5*12AWG | 65/30 | 0.38 | 15 | 0.10 | 4 | 1.14 | 45 | 12.7 | 0.500 | 271 | 182 |
3*10AWG | 105/30 | 0.51 | 20 | 0.10 | 4 | 1.14 | 45 | 12.5 | 0.492 | 261 | 175 |
4*10AWG | 105/30 | 0.51 | 20 | 0.10 | 4 | 1.52 | 60 | 14.6 | 0.576 | 362 | 243 |
5*10AWG | 105/30 | 0.51 | 20 | 0.10 | 4 | 1.52 | 60 | 15.7 | 0.619 | 453 | 304 |
3*8AWG | 168/30 | 0.76 | 30 | 0.13 | 5 | 1.52 | 60 | 17.4 | 0.686 | 506 | 340 |
4*8AWG | 168/30 | 0.76 | 30 | 0.13 | 5 | 1.52 | 60 | 19.2 | 0.756 | 644 | 433 |
5*8AWG | 168/30 | 0.76 | 30 | 0.13 | 5 | 1.52 | 60 | 20.9 | 0.824 | 788 | 529 |